All about product
Specification
Reviews
Questions
Uninterruptible power supplies (UPS) with a true sine wave ensure autonomous operation of electrical equipment from the battery in cases of power outages from the general network.
When using a UPS with a true sine wave and an external battery, the equipment operates in optimal conditions, both during power outages and when operating from the general network. Operating modes are switched automatically. The equipment connected to the UPS does not have time to turn off, since the switching speed is fractions of a second.
The 24V LPY-W-PSW-1500VA+(1050W)10A/15A uninterruptible power supply has a built-in voltage stabilization function in the range from 140-275 V at the input to 220±10% at the output. This is especially important for sensitive devices (computers, TVs, laboratory equipment, servers, network devices, etc.).
Characteristics
-
Type: line-interactive with a regular sine wave
-
Series: LPY
-
Power, VA/W: 1500/1050
-
Nominal battery voltage, V: 24
-
Charging current from the network, A: 10/15
-
Number of outputs: 2
-
Installation: wall-mounted
-
Number of phases: 1
-
Output voltage shape: regular sine wave
-
Input voltage range, V: 140-275
-
Output voltage, V: 220±10%
-
Frequency range, Hz: 50/60
-
Switching time, ms: 4-6
-
Weight, kg: 8.7
Connection
-
Type of connection to the network: Europlug
-
Type of connection of the load to the UPS: Europlug
-
Type of connection of the battery to the UPS: terminals
Protection function AVR voltage stabilization and protection against short circuit, voltage surges, overload, discharge, overcharge of batteries
Additionally
-
Display type: LCD
-
Operating temperature, °C: 0 ~ +40
-
Body material: metal
-
Warranty, months: 24
Dimensions and color
-
Color: black
-
Length, mm: 270
-
Width, mm: 170
-
Height, mm: 330
Where are uninterruptible power supplies with a correct sine wave used 24V LPY-W-PSW-1500VA+(1050W)10A/15A with external battery?
Medical equipment: to support power supply of ultrasound and other diagnostic devices in case of power outages and sudden voltage surges in the network.
Audio and video equipment: to reduce network interference and noise. This improves the quality of audio and video recordings, and also increases the efficiency of studio equipment; to maintain uninterrupted operation of professional equipment, such as mixers, amplifiers and speakers.
Industrial equipment: to ensure the continuity of production processes by installing uninterruptible power supplies for controllers, automated systems and other important electrical equipment; to maintain stable operation of production equipment without short circuits, overheating and wear of safety blocks.
Home appliances: to ensure uninterrupted power supply to computers, televisions, refrigerators, air conditioners, security systems and other household appliances during power outages.
UPS with a correct sine wave and an external battery are used:
-
as uninterruptible power supplies for gas or solid fuel heating boilers;
-
UPS for emergency lighting;
-
to provide backup power for server stations and telecommunications equipment;
-
UPS with a pure sine wave for circulation pumps.
The UPS should only be used together with a battery (battery not included), which must meet the technical specifications of the device.
Types of external batteries that can be connected to the UPS:
-
Lead-acid AGM. Service life - up to 400 charge/discharge cycles.
-
AGM (multigel). Service life - up to 800 charge/discharge cycles.
-
Gel battery. Service life - up to 1200 charge/discharge cycles.
-
Lithium iron phosphate battery. Service life - up to 7000 charge/discharge cycles.
Connection diagrams for UPS with a correct 24V sine wave LPY-W-PSW-1500VA+(1050W)10A/15A. The connection diagram via 220V network will allow you to quickly connect only the necessary devices.
3 steps to connect the UPS via the outlet:
-
Connect the battery, observing the polarity;
-
Connect the UPS to the network by inserting the UPS plug into the 220V outlet;
-
Wait for the self-diagnosis to complete and the UPS to turn on.
Connection through the electrical distribution board will allow not only to use electrical appliances in the usual places, but also to control the connection through power supply circuit breakers. Attention! Work on connecting the UPS through the electrical panel must be performed by a qualified electrician with the appropriate approval standard.
Attention! The UPS will turn on automatically! It is forbidden to press the power button and interrupt self-diagnosis!
Choosing a UPS for heating boilers and emergency lighting systems. Before buying a UPS with a correct (pure) sine wave, it is necessary to take into account the following technical characteristics:
-
The total power of electrical appliances that will be connected to the UPS. The parameter can be found in the technical documentation of each unit of equipment.
-
Starting power - the amount of electricity that the device consumes when turned on. To connect a UPS to equipment with high starting currents, you need to choose a more powerful UPS model.
-
You need time for the pump to operate autonomously from the battery. It is determined by the individual needs of the consumer. For long-term autonomous operation, you should choose a UPS with a pure sine wave at the output, to which you can connect an external battery.
To ensure that your uninterruptible power supply with an external battery works for a long time and efficiently, follow the manufacturer's recommendations and instructions given in the operating manual. This will help to avoid mistakes during the care and maintenance of the device.
There are no reviews for this product, be the first to leave your review.
No questions about this product, be the first and ask your question.
By Nova Poshta delivery service
To a branch - from 80 UAH
To a post office box - from 70 UAH
Courier delivery - from 130 UAH
Attention!
Minimum order from 200 UAH.
Please note that goods may be shipped from different warehouses.
All goods in the “Camouflage nets” category are shipped upon prepayment of 20% of the order amount.
Goods worth 5000 UAH or more are shipped upon prepayment of 15% of the order amount.
Shipping of imported goods (not of our own production) is subject to a prepayment of 20% of the order amount.
In the event of a warranty claim, all costs of transporting the defective goods by carrier companies are paid by the store.
If the goods are returned within 14 days, all transportation costs are paid by the buyer!
For orders over 10,000 UAH (including cash on delivery), shipping is free!
Pickup from the warehouse
Warehouse address: 17 Griboedova Lane, Vinnytsia, Vinnytsia region, 21032
Working hours: Monday - Friday from 9:30 a.m. to 6:00 p.m.
By bank transfer using the details provided
In cash upon receipt at the Nova Poshta branch
In cash upon pickup from the warehouse
The warranty period depends on the product group.
To do so, please call (066) 557-70-77 or email kiborg.com.ua@gmail.com.
