Fenix LD30R handheld flashlight

Description of the Fenix LD30R hand-held flashlight:

The powerful, durable and lightweight Fenix LD30R flashlight has all these characteristics, claiming the title of perhaps the best EDC model among similar lighting devices in the brand's range. Thanks to its compact size, the flashlight can be carried with you on everyday walks to illuminate the road in the dark. At the same time, its moisture resistance and brightness, reaching 1700 lumens, are relevant for lovers of travel and outdoor activities, for whom a powerful and durable light source is a guarantee of not only comfort, but also safety.

Under the tempered glass lens is a single Luminus SST40 LED, emitting a light flux with a color temperature of about 6000K. This is a cold white light that surpasses the warm spectrum beam in long-range. The smooth reflector also increases the beam range parameters, which is 257 meters. The head of the structure is framed by a metal bezel that protects the lens from damage.

In addition to spot lighting of objects at different distances, the flashlight can be used for soft lighting of a small area; for this, you need to attach the Fenix AOD-S V2.0 diffusion filter to the model (purchased separately).

Operating modes

The Fenix LD30R flashlight has 7 operating modes. They are divided into 2 groups according to the type of lighting: 5 lighting options in the main group with constant light and 2 modes in the flashing group.

Main group

• Turbo: 1700 lm 18037 cd 267 meters 2 h 10 min;
• High: 600 lm 6500 cd 161 meters 2 h 50 min;
• Medium: 150 lm 1605 cd 80 meters 14 h 40 min;
• Low: 50 lm 510 cd 45 meters 37 h 25 min;
• Moonlight: 1 lm 16 cd 8 meters 750 h.

Flashing group

• Strobe: 1700 lm;
• SOS: 50 lm.

Keep in mind!The operating time in Turbo mode is indicated taking into account the duration of operation in modes with less bright light. They are sequentially activated in order of decreasing power when the temperature of the internal electronics reaches a critical value of 60, and intelligent overheating protection is triggered.

Control features

The model has a combined type of control: a standard electronic switch is located in the main part of the flashlight, and the second button is located in the tail of the structure.

The buttons are responsible for different functionality:

• On / off. momentary light: pressing the tail button activates a momentary light that turns off when the user releases the button.
• On / off constant light: pressing the tail button all the way down activates a constant light that does not turn off if you remove your finger from the switch. You can turn off the light by pressing the same button again.
• Changing the mode group: the flashlight automatically activates in the main mode group. Switching to the flashing group is done by pressing the side switch for 0.5 seconds with the light on. You can switch back to the main group in the same way.
• Switching modes in the main group: pressing the side switch when the light is on changes the modes in the following order: Moonlight Low Medium High Turbo.
• Switching modes in the flashing group: pressing the side switch once after switching to the flashing group cyclically changes the mode in the order: Strobe SOS.

The memory of the last mode is a useful option in a flashlight for those who do not want to waste extra time searching for their favorite brightness. This function works for the modes from the main group as follows: the flashlight stores the power of the last mode in which the model was lit before turning it off, and immediately activates it the next time it is turned on.

Power source

The power source for the Fenix LD30R, recommended by the manufacturer, is a 18650 standard battery, namely the branded ARB-L18 with a capacity of 3400 mAh (nominal power 3.6 V). You can charge it directly in the battery compartment of the flashlight by connecting the charging cable from the set to the USB Type-C port. The port is located in the head of the case.

Using a 5V 2A power adapter, the battery charging process takes 3 hours. The end of charging is signaled by an indicator built into the electronic switch. This indicator also allows you to monitor the remaining charge level each time you turn on the flashlight:

• Green (steady):100% - 85%;
• Green (flashing):85% - 50%;
• Red (steady): 50% - 25%;
• Red (flashing):25% - 1%.

Instead of a rechargeable battery, you can use 2 disposable CR123A lithium batteries (nominal voltage 3.0 V) to power the model.

Other batteries, such as LiFePO4 18650 or li-ion 16340, are prohibited.

Physical parameters

Shock resistance at 1 meter is ensured by the CNC-machined aluminum body. The metal is not subject to corrosion, and the anti-abrasive anodized layer provides additional protection against oxidation in case of prolonged contact with aggressive environments. The place where the body is held by the hand has a knurling that prevents the palm from slipping on the metal.

The body is completely dust- and waterproof, as evidenced by the IP68 protection standard. In addition, the flashlight continues to work even after half an hour of immersion in water to a depth of 2 meters.

Taking into account the functionality and brightness of the lighting, the dimensions of the Fenix LD30R are impressive: 129.7 mm (length) x 26.5 mm (head diameter) x 22.6 mm (tail diameter). The flashlight can be stored in the case included in the kit, and worn on a belt by securing the model with a removable clip. Especially since the case weighs only 132 grams with the installed battery.

Package

Fenix LD30R flashlight, ARB-L18-3400 battery, USB Type-C charging cable, O-ring (spare), branded case and lanyard, instructions and warranty.

Characteristics:

• handheld flashlight for everyday use, tourism, outdoor activities;
• case color is black;
• Luminus SST40 LED (6000K) with a service life of 50 thousand hours;
• 7 operating modes (2 groups) with a brightness of up to 1700 lumens;
• light flux range 267 meters;
• max operating time 750 hours;
• combined control type (side switch + tail button);
• power source 1 x 18650 or 2 x CR123A;
• presence of a USB Type-C charging port built into the case;
• the side switch has a battery level indicator;
• additional functions: memory of the last mode, overheating protection;
• aluminum case processed on a CNC machine and covered with an anodized layer;
• impact resistance 1 meter;
• protection against dust and moisture IP68;
• dimensions 129.7 x 26.5 x 22.6 mm;
• weight 132 g.