VIDEX VLF-AT366 1000Lm 5000K Tactical LED Flashlight

The VIDEX VLF-AT366 1000Lm 5000K tactical LED flashlight is designed for individual use in the dark or in rooms without lighting. The main indicators are tightness, reliable housing, light range. Allows you to choose not only the required operating mode, but also the color of the light: white or red. Another advantage of the flashlight is the ability to adjust the focus.

A cord is used for the flashlight, which ensures convenient use and transportation. The kit also includes a clip, a spare cover for the tactical button and Picatinny rail holder. The Picatinny rail holder is useful when the flashlight needs to be mounted on a weapon. To mount the flashlight on the rail, unscrew the clamping nut counterclockwise. Place the flashlight on the rail, and then tighten the clamping nut clockwise  arrow.

Maximum brightness 1000Lm. Luminus SST40 10W LEDs are used for white light. 

Flashlight control   
The flashlight has a simple button control system that allows you to easily switch between lighting modes and use it with one hand. Has two control buttons: the tail button («Tail Button») and the mode switch («Mode switch button»), as well as a color selector.

- The tail button, located on the top of the case, provides quick access to the flashlight. To turn on the lighting, just press the button halfway. To turn off the lighting, just release it. Or you can turn the light on and off by fully pressing the tail button.

- By simply pressing the mode switch when the light is on, you can cycle through the brightness modes in a circle, and if you press the button for a long time (3 seconds), the flashlight activates STROBE mode. To exit this mode, you must press the mode switch.

- Turn the color selector to the «R» side to turn on the red light. Or turn it to the «W» side to turn on the white light.

- To reduce the angle of the light beam, turn the focusing mechanism to the right. To increase the angle of the light beam, turn the mechanism to the left. 

Flashlight operating mode: 
HIGH (Maximum light power mode) – light brightness 1000Lm. Lighting distance is 200m. Operating time is 2h. Light intensity is 11200cd. 

MOON (Night mode) – the longest operating time possible in this mode is 105h, while generating a light flux of 5Lm. Lighting distance is 10m. Light intensity is 20cd. 

STROBE (Strobe) – quickly reproduces repeating bright white light pulses. Light brightness is 1000Lm. Operating time is 2h. Lighting distance is 200m. Light intensity is 11200cd. Operating time in STROBE mode – This is the total time tested with the overheat protection on. 

RED HIGH  (Red light with maximum power) - light brightness 80Lm. Lighting distance 30m. Operating time 3h. Luminous flux intensity 195cd. 

RED LOW (Red light with minimum power) - light brightness 5Lm. Lighting distance 15m. Operating time 120h. Luminous flux intensity 43cd.

The red light uses a GREE XPE 3W LED.

The discharge time was tested with a standard battery 18650 2200mAh. The above parameters may vary depending on the environment. Automatically remembers the selected mode.

The LED indicator on the button notifies you of the flashlight's charge level:
- Glows green when fully charged (100-80%).
- Flashes green when charging (79-50%).
- Glows red when charging (49-25%).
- Flashes red when charging (24-1%).

Charging is available using aUSB-C cable.18650 batteries are used as power supplies.

Excellent protection and adaptability for use in difficult and extreme conditions. It can withstand mechanical loads and falls from a height without any problems. It can fall from a height of1m and not be damaged. The flashlight has a dust and moisture protection standard – IP66. 

An excellent, modern, highly efficient flashlight will be a great companion during outdoor activities. Easy to use. Warranty 3 years on the flashlight and 1 year on the battery. The warranty does not apply to accessories.